Linear Actuators
Actuador Lineal Welact 4, W 4M, W 4P, W 4PM, W4EH, W4PFMH, W4PPLC
Compact actuator designed to move low and medium loads, has several versiones.Welact 4 for max 125 kg. and Welact 4P to max 400 kg, suitable for worki...
Actuator Welact 40, W 40F, W 40FM, W 40FMH, W 40FMHPLC
The models are W40 families have the highest performance regarding strength and speed, there are five speeds and five ranges of force. They have recir...
Linear Actuator Welact B10 RDE
Models that belong to the family Welact RDE B10 have the largest benefits in respect of forces and speeds, four and five speed range of forces. Have r...
The main difference between this actuator and the others is the possibility, linking with the control, of performing the piston feedback, viewing the ...
This actuator has the possibility, associating corresponding control, feedback of the position where the piston is via the use of a display provided b...
Linear Atuator Welact B10 and Welact B10H
Welact 10 family has the most quantity of variations respect the force and velocity. It has four velocities and five ranges of force. It has a robust ...
Welact 2, Welact 2P, W2H, W2PH, W2EH, W2PEH Linear Actuators
Compact actuator designed for moving light loads, suitable for working as much inner as outdoors. This joins many features of major price products....
Welact 200 and Welact 200P Linear Atuator
The main difference between this actuator and the others is the possibility, linking with the control, of performing the feedback, viewing the positio...
Welact 300, W 300P, W 300 PF y W 300 PF PLC Linear Atuator
This actuator has the possibility, linking with the control, of feedback on the position where the piston is. Available in 125kg for Welact 300 family...
Welact A10 family is designed for relatively light loads, it incorporates parts of more expensive families like Welact B10....
Compact for ligths and medium loads. Actuator available for working in small zones without sacrificing in power and reliability. Able to work so inn...
Compact actuator that works in little places without strength nor reliability sacrifice, suitable for working such as inner as outdoors....
WLR1 WLH1 and WLM1 Linear Atuator
These actuators have the advantage with respect to the WL1 version that can deliver a reading on the absolutely and relative WLR1 version reading the ...
PRODUCTOS > Linear Actuators
WLR1 WLH1 and WLM1 Linear Atuator
These actuators have the advantage with respect to the WL1 version that can deliver a reading on the absolutely and relative WLR1 version reading the version WLH1 stem position. 95mm maximum travel to WLR1 and 152.4 for WLH1. Both have versions 12 and 24 volts.
La amplia gama disponible de fuerzas vs. Recorridos hacen de estos equipos una opción simple y confiable.
Este actuador es funcionalmente intercambiable con uno neumático o hidráulico, en usos intermitentes.Este actuador mantiene una repetitividad independientemente de la temperatura ambiente, humedad, etc., además puede trabajar sin la necesidad de mantenimiento o ajustes por desgastes.
A great range of force Vs. stroke length makes this family a simple and reliable option.
This actuator is interchanged with a hydraulic and pneumatic sytem only for intermitent uses. This actuator keeps a repetition independly of the temperature and ambient moisture, etc. Also is able to work withuot the maintenance needs or wear adjustment.
The Welact L1 families are able for positioning, adjusting, etc. These actuators are able in four range of forces 12-25-50 and 75 kg and five stroke lengths also are able in 12 and 24 vdc.
The Welact L1 family has some advantages respect with the WS1 family. Quantity of cycles, more robust design vibration working, hostile chemical ambient, maior working temperature range up to 95ºC.
Control
We have three kind of controls for Welact L1 according with the client needs.
SCAS-W1-12/24: When the control and the power are driven from the same box.
SCACD-W1-12/24 Useful when the actuator is far away from the control.
SCACR-W1-12/24 Wireless Control System .
Also ours actuators have a minimun mechanical and electrical maintenance without periodical maintenance and without lackage of air.
Features
1) Internal Limit Switch to allow the actuator to stop in both ends of stroke, and change the direction with the polarity.
2) U mounting with a pin.
3) Max Load 75 kg. Máx stroke length 152.4 mm
4)Housing made in Aluminium. Sealed for outdoors working, and dusty ambient.
Tipical Applications
1) Small Stroke lengths.
2) Industrial Owen.
3) Vibration Tables.
4) Parabolic Antenna Adjusting.
General Specifications
Input Voltage:: 12 and 24 vdc
Stroke length: 25.4--50.8-101.6-152.4mm
Load Capacity:12 and 25 kg -50 and 75 kg.
Note: Actuators with 75 kg are available with 75kg for pushing and 50 kg for pulling. Excepto 75kg tienen 15% a la max carga.
Duty Cycle: 25% at max load. Except 75kg with 15% at máx load.
Motor Protection: With Motor protection.
Limit Switch: Yes internal fixed, External Adjustable.
Screw: Acme.
Temperature Range: -26 a 95 ªC.
External Housing: Aluminium with Epoxi protection.
Enviroment Protectione: IRAM 2444/82. IP 65
Enviroment Test: 96 hs salt spray tested.
Section of Wires: 1 mm2 y Ø 1,1 mm
Plugs: Optional. (see specific section)
Start-Stop Torque: 23 kg.cm.
Static Load: 150 kg.
Cycles: 145.000 cycles
Packing Box Meassure:: Length 295mm; Width 105mm; High: 60mm
Codificación de los Actuadores Welact L1
| Stroke Length (mm) | Voltage | Load Capacity (12 kg) | Load Capacoty 25 Kg | Weigth (Kg) |
|---|---|---|---|---|
| 25,4 | 12 | WL1 - 12 - 12 - 9 - 25.4 | WL1 - 12 - 25 - 12- 25.4 | 0.794 |
| 25,4 | 24 | WL1 - 24 - 12 - 9 - 25.4 | WL1 - 24 - 25 - 15- 25.4 | 0.794 |
| 50,8 | 12 | WL1 - 12 - 12 - 9 - 50,8 | WL1 - 12 - 25 - 12- 50.8 | 0.858 |
| 50,8 | 24 | WL1 - 24 - 12 - 9 - 50,8 | WL1 - 24 - 25 - 15- 50.8 | 0.858 |
| 101,6 | 12 | WL1 - 12 - 12 - 9 - 101,6 | WL1 -12- 25 - 12- 101.6 | 0.986 |
| 101,6 | 24 | WL1 - 24 - 12 - 9 - 101,6 | WL1- 24 - 25 - 15- 101.6 | 0.986 |
| 152,4 | 12 | WL1 - 12 - 12 - 9 - 152,4 | WL1 -12 - 25 - 12- 152.4 | 1.114 |
| 152,4 | 24 | WL1 -24 - 12 - 9 - 152,4 | WL1-24 - 25 - 15- 152.4 | 1.114 |
Welact L1 Dimentional Drawing
| Pulg | A (mm) | B (mm) |
|---|---|---|
| 1/2 | 12.7 | 122.30 |
| 1 | 25.4 | 135 |
| 2 | 50.8 | 160.4 |
| 4 | 101.60 | 211.2 |
| 6 | 152.40 | 262 |
Welact WS1/WL1 Actuator instalation
SUPPORT IN THE ACTUATOR MOBILE ZONE
Welact WS1/WL1 Actuator instalation. Mounting in a back zone.
Dimensional plane WLR1
| Travel | A(mm) | B(mm) |
|---|---|---|
| 1 pulg | 25.4 | 213 |
| 2 pulg | 50.8 | 213 |
| 3 pulg | 76.2 | 213 |
| 90 mm | 90 | 213 |
| 95 mm | 95 | 213 |
Current Vs. Load
Velocity Vs Load
Duty Cycle Vs. Load
Cycles Vs. Load
Nota: Para los modelos en 50 y 75 kg los ciclos de vida son tomados con 2" de recorrido y un Tiempo de Ciclo al 15 %
- Download
WELACT WLH1-1/2-INF /SOLD/IGS/STEP (2346kb) - Download WELACT WLH1-1/2-SUP /SOLD/IGS/STEP (2420kb)
- Download WELACT WLH1-1-INF /SOLD/IGS/STEP (2427kb)
- Download WELACT WLH1-1-SUP /SOLD/IGS/STEP (2504kb)
- Download WELACT WLH1-2-INF /SOLD/IGS/STEP (2491kb)
- Download WELACT WLH1-2-SUP /SOLD/IGS/STEP (2432kb)
- Download WELACT WLH1-4-INF /SOLD/IGS/STEP (5116kb)
- Download WELACT WLH1-4-SUP /SOLD/IGS/STEP (2544kb)
- Download WELACT WLH1-6-INF /SOLD/IGS/STEP (2590kb)
- Download WELACT WLH1-6-SUP /SOLD/IGS/STEP (2600kb)
- Download WELACT WLR1-INF /SOLD/IGS/STEP (2570kb)
- Download WELACT LR1-SUP-1in /SOLD/IGS/STEP (2582kb)
- Download WELACT WLR1-SUP-2in /SOLD/IGS/STEP (2659kb)
- Download WELACT WLR1-SUP-90 /SOLD/IGS/STEP (2633kb)
- Download WELACT WLR1-SUP-95 /SOLD/IGS/STEP (2667kb)
Try again
Try again
